Convex Mirrors Ireland
 

Buyers Guide

For Convex Mirrors only!

Helps you to choose among the different sizes for your application. Please keep in mind that it is always best to use the largest mirrorpossible for the application, keeping in mind that the larger the mirror, the more detailed is the reflected view.

If the purpose is to watch the movements of a person or vehicle then use the table marked "Man"

If a more detailed surveillance is required or at dimmed light conditions, then use table marked "Text" 


guide to purchasing the correct convex mirror to suit your requirements.



 

 

watch the movements of a person or vehicle. 

detailed surveillance is required or under dimmed light conditions.

If the purpose is to watch the movements of a person or vehicle.

If a more detailed surveillance is required or under dimmed light conditions.




Hemispheres for general panoramic viewing

Hemispheres are tough, but still very light in weight and can be attached directly to false ceilings or alternatively suspended from the ceiling using the four predrilled holes in the flange.

Hemispheres are available in:
  • 45 cm diameter (18")
  • 60 cm diameter (24")
  • 80 cm diameter (31")
  • 100 cm diameter (39")



The recommended distance from the floor to the bottom of the hemisphere is about 2,5 m - and please observe that it is always best to use the largest mirror possible for the application.

 

This acrylic panoramic dome mirror provides collision prevention and surveillance for hospitals, clinics, rest homes and industrial warehouses.
360° Full Hemispheres - for large-area panoramic viewing or 4-way intersections
360° Full Hemispheres - for large-area panoramic viewing or 4-way intersections
180° Half Hemispheres - for 3-way "T" intersections
180° Half Hemispheres - for 3-way "T" intersections
90° Quarter Hemispheres - for 2-way "L" situations
90° Quarter Hemispheres - for 2-way "L" situations

 


Recommended sizes for this purpose are the diameters 60, 80 or 100 cm.

 




 

T-Panoramic Safety Mirrors

 

T Panoramic Mirror provides collision prevention

Observation distance: up to 8 m.

The T Junction Panoramic safety mirror is equipped with a special wide-angle mirror, which gives a clear line of vision in both directions. The  T-panoramic mirror is therefore particularly useful at T-junctions / intersections, where it replaces two conventional safety mirrors. The photo below was taken from the facing car. The driver overlooks both directions effectively. Because of the reduction of the image in the corners we recommend the T-panorama mirror only in places with slow driving traffic.

special wide-angle mirror